 |
MANUFACTURER
MODEL
|
John Deere
110 TLB
|
|
| Tractor Unit
|
|
|
|
Engine
|
---
|
|
|
|
|
|
Type
|
Diesel, Direct Injection
|
|
|
|
|
|
Manufacturer/Model
|
Yanmar/TNV88
|
|
|
|
|
|
Gross Eng. HP (kW) @ Rated Speed
|
43.0 (32.1) @ 2600
|
|
|
|
|
|
Net Eng. HP (kW) @ Rated Speed
|
41.0 (30.6) @ 2600
|
|
|
|
|
|
PTO Output HP (kW) @ Engine Speed
|
33.0 (24.6) @ 2600
|
|
|
|
|
|
Hydraulic HP (kW)
|
30.9 (23.1)
|
|
|
|
|
|
Cylinders
|
4 Cylinders
|
|
|
|
|
|
Total Displacement, cu. in. (l)
|
133.6 (2.2)
|
|
|
|
|
|
Fuel consumption, 75% load, gal./hr.
|
2.0 (7.5)
|
|
|
|
|
|
Restart
|
Auto-bleed
|
|
|
|
|
|
Cold Start Assist
|
Air Preheat Coil
|
|
|
|
|
|
Rated Speed, rpm
|
2600
|
|
|
|
|
Electrical
|
---
|
|
|
|
|
|
Volts/Alternator
|
12V/40 Amp Standard, 55 Amp Optional
|
|
|
|
|
|
Battery CCA
|
650
|
|
|
|
|
|
Alternator Amperes
|
40 Standard; 55 Optional
|
|
|
|
|
|
Starter Size, HP (kW)
|
2.7 (2.0)
|
|
|
|
|
Hydraulics
|
---
|
|
|
|
|
|
Type
|
Open Center
|
|
|
|
|
|
Number of Pumps
|
3
|
|
|
|
|
|
Total Flow, gpm (l/m)
|
23.6 (89.2)
|
|
|
|
|
|
System Pressure, psi (kPa)
|
3000 (20,684)
|
|
|
|
|
|
Hydraulic Flow to Loader, gpm (l/m)
|
12.2 (46.1)
|
|
|
|
|
|
Hydraulic Flow to Backhoe, gpm (l/m)
|
16.3 (61.5)
|
|
|
|
|
|
Oil Cooler
|
Steel, Thick Core, 190 sq. in. (123,024 sq. mm)
|
|
|
|
|
Capacities
|
---
|
|
|
|
|
|
Fuel Tank, gal. (l)
|
15.3 (58)
|
|
|
|
|
|
Crankcase with Filter, gal. (l)
|
1.25 (4.9)
|
|
|
|
|
|
Cooling System, gal. (l)
|
2.4 (9)
|
|
|
|
|
|
Transmission and Hydraulic System, gal. (l)
|
15.0 (57)
|
|
|
|
|
|
Transmission Case and Filter, gal. (l)
|
9.7 (37)
|
|
|
|
|
|
Transmission and Hydraulic Oil
|
HyGard J20C or HyGard J20D Cold Service
|
|
|
|
|
|
Front Axle Gearcase (MFWD axle), gal. (l)
|
1.3 (4.9)
|
|
|
|
|
Steering
|
---
|
|
|
|
|
|
Type
|
Hydrostatic Power
|
|
|
|
|
|
Turn Angle
|
58 Degrees
|
|
|
|
|
|
Turns Lock-to-Lock
|
---
|
|
|
|
|
Brakes
|
---
|
|
|
|
|
|
Type
|
Wet Disk, Inboard
|
|
|
|
|
|
Actuation
|
Mechanical
|
|
|
|
|
|
Parking Brake
|
Automotive Style Lever
|
|
|
|
|
|
Turning Brakes
|
Individual
|
|
|
|
|
Rear Power Take Off
|
---
|
|
|
|
|
|
Type
|
Fully Independent
|
|
|
|
|
|
Speed, rpm
|
540 @ 2,600 Engine RPM
|
|
|
|
|
|
PTO Engagement
|
Solenoid Operated Clutch
|
|
|
|
|
|
PTO Clutch
|
Wet, Multi-Disk
|
|
|
|
|
|
PTO Brake
|
Wet, Multi-Disk
|
|
|
|
|
Tires
|
---
|
|
|
|
|
|
Front
|
10x16.5, 8 PR
|
|
|
|
|
|
Rear
|
17.5Lx24, 8 PR
|
|
|
|
|
|
Tread Pattern
|
Industrial (R4) Standard; Turf (R3) Optional
|
|
|
|
|
Rear Hitch
|
---
|
|
|
|
|
|
3-Point Hitch
|
Category I Standard; Field Installed Optional
|
|
|
|
|
|
Control Type
|
Position only
|
|
|
|
|
|
Lift Capacity @ 24-in. behind lift point, lb. (kg)
|
2500 (1134)
|
|
|
|
|
|
Drawbar Hitch
|
Field Installed Optional
|
|
|
|
|
|
Lift Capacity @ link ends, lb. (kg)
|
---
|
|
|
|
|
Operator Station
|
---
|
|
|
|
|
|
Steering
|
Non-Tilt
|
|
|
|
|
|
Direction Control
|
Dual Foot Pedal
|
|
|
|
|
|
Instrumentation
|
Right Side Console
|
|
|
|
|
|
Seat Conversion
|
Roll Over
|
|
|
|
|
|
Canopy
|
Curved Polyethelyne
|
|
|
|
|
|
Rollover Protective Structure
|
4-Post, SAE J1040 to 9000 lb.
|
|
|
|
|
|
Falling Object Protective Structure
|
Canopy Sheet, ISO 3449 Level 1
|
|
|
|
|
|
Standard Lighting
|
2 55 Watt Canopy Mounted
|
|
|
|
|
|
Warning Lights
|
Canopy Mounted
|
|
|
|
|
|
Stop/Brake Lights
|
Rear, Canopy Mounted
|
|
|
|
|
|
Transmission Presence Safety System
|
Yes
|
|
|
|
|
|
PTO Presence Safety System
|
Yes
|
|
|
|
|
|
Backhoe Presence System
|
Yes
|
|
|
|
|
Drivetrain
|
---
|
|
|
|
|
|
Clutch; Wet/Dry
|
---
|
|
|
|
|
|
Creeper
|
---
|
|
|
|
|
|
Creeper Location
|
---
|
|
|
|
|
|
Maximum Traveling Speed, mph (k/h)
|
---
|
|
|
|
|
|
Range Speeds
|
---
|
|
|
|
|
|
Transmission Controller
|
---
|
|
|
|
|
|
Transmission Ranges/Speeds
|
---
|
|
|
|
|
|
Transmission Type
|
---
|
|
|
|
|
Powertrain
|
---
|
|
|
|
|
|
Final Drives
|
---
|
|
|
|
|
|
Front Axle
|
---
|
|
|
|
|
|
Front Axle Oscillation
|
---
|
|
|
|
|
|
Front Differential
|
---
|
|
|
|
|
|
MFWD Engagement
|
---
|
|
|
| Loader Unit
|
|
|
|
Model
|
John Deere
|
|
|
|
|
Design
|
---
|
|
|
|
|
|
Type
|
Closed Box Construction Style Lift Arms
|
|
|
|
|
|
SCV Control
|
Single Lever Tractor Mount
|
|
|
|
|
|
Boom Control Valve System
|
Series Type
|
|
|
|
|
|
Masts
|
Ductile Cast Iron, Z-Form Webbing
|
|
|
|
|
|
Boom Bushings
|
Replaceable
|
|
|
|
|
|
Pin Service
|
End-Of-Pin Greasing
|
|
|
|
|
|
Bucket Anti-Roll-Back Device
|
Mechanical
|
|
|
|
|
|
Auxiliary Front Hydraulics
|
Optional Factory Installed
|
|
|
|
|
|
Bucket Quik-Coupler
|
Standard
|
|
|
|
|
|
Bucket Mounting Plates
|
Skid Steer Loader
|
|
|
|
|
|
Bucket Mounting Plate Area, sq. in. (m2)
|
270 (174,193)
|
|
|
|
|
|
Standard Bucket Width, in. (mm)
|
72 (1829)
|
|
|
|
|
|
Anti-Rollback Devise
|
Mechanical
|
|
|
|
|
Dimensions
|
---
|
|
|
|
|
|
Lift Height to Pivot Pin, in. (mm)
|
114.8 (2917)
|
|
|
|
|
|
Max. Dump and Rollback Angle
|
---
|
|
|
|
|
|
Reach at Max. Lift Height, in. (mm)
|
---
|
|
|
|
|
Performance
|
---
|
|
|
|
|
|
Breakout Force @ Pivot Pins, lb./ft. (N)
|
---
|
|
|
|
|
|
Lift Cap. to Max Height/Pivot Pins, lb.(kg)
|
---
|
|
|
|
|
|
Lift Cap. to Max. Height, lb. (kg)
|
---
|
|
|
| Backhoe Unit
|
|
|
|
Model
|
John Deere
|
|
|
|
|
Design
|
---
|
|
|
|
|
|
Construction
|
Boxed Construction from High Strength, Low Alloy Steel, Robotically Welded
|
|
|
|
|
|
Backhoe Controls
|
Two Lever, Direct Linkage
|
|
|
|
|
|
Boom Type
|
Curved, Fully Closed
|
|
|
|
|
|
Swing Frame
|
Cast Iron
|
|
|
|
|
|
Boom and Crowd Cylinder Mounting
|
In-Line, Pinned
|
|
|
|
|
|
Swing Cylinder Mounting
|
Cast in Trunions, Cast-Iron Mounting
|
|
|
|
|
|
Cylinder Rod Plating
|
Nickel Chrome
|
|
|
|
|
|
Cylinder Rod Harness
|
HRC58
|
|
|
|
|
|
Cylinder Rod End Attachment
|
Friction Welded
|
|
|
|
|
|
Stabilizer Feet
|
Cast Iron, Reversible
|
|
|
|
|
|
Aux. Hyd. Opt. (7th Function Valve)
|
Factory Installed
|
|
|
|
|
|
Bucket Linkage
|
John Deere Power Link with Guide Link
|
|
|
|
|
|
Swing Lock Mechanism
|
Lift Pin
|
|
|
|
|
|
Boom Lock Mechanism
|
Lever Actuated Hook, Rubber Cushioned
|
|
|
|
|
|
Stabilizer Angle Rearward
|
18 Degree
|
|
|
|
|
|
Bucket Couplers Available
|
Std. Pin on/Opt. Mech. Coupler
|
|
|
|
|
|
Bucket Sizes Available, in.
|
12, 16, 18, 20, 24, 30, 36
|
|
|
|
|
Dimensions
|
---
|
|
|
|
|
|
Max. Digging Depth, in. (mm)
|
121 (3073)
|
|
|
|
|
|
Truck Loading Height, in. (mm)
|
101 (2567)
|
|
|
|
|
|
Reach from Swing Pivot, in. (mm)
|
158.1 (4016)
|
|
|
|
|
|
Boom Swing Arc
|
180 Degree
|
|
|
|
|
|
Bucket Rotation Arc
|
190 Degree
|
|
|
|
|
|
Stabilizer Spread-Oper., in. (mm)
|
98 (2489)
|
|
|
|
|
|
Leveling Angle
|
13
|
|
|
|
|
|
Digging Depth/2-ft. Flat Bot., in. (mm)
|
---
|
|
|
|
|
Performance
|
---
|
|
|
|
|
|
Digging Force-Crowd, lb. (kN)
|
3764 (16.743)
|
|
|
|
|
|
Digging Force-Bucket, lb. (kN)
|
5723 (25.457)
|
|
|
|
|
|
Side Swing Force, lb./ft. (kN/m)
|
7,975 (10.8)
|
|
|
|
|
|
Boom Lift Capacity at Ground Level, lb. (kg)
|
1216 (552)
|
|
|
|
|
|
Dipperstick Lift Capacity at 8-ft. above ground, lb. (kg)
|
1499 (680)
|
|
|
| Overall Dimensions
|
|
|
|
Tractor Wheelbase, in. (mm)
|
71.5 (1815)
|
|
|
|
|
Transport Length-Backhoe Folded, in. (mm)
|
---
|
|
|
|
|
Transport Width-Incl. Front Bucket, in. (mm)
|
---
|
|
|
|
|
Curb Turning Radius w/o Brakes, in. (mm)
|
144 (3568)
|
|
|
|
|
Curb Turning Radius w/Brakes, in. (mm)
|
124 (3150)
|
|
|
|
|
Bucket Clearance Circle w/o Brakes, in. (mm)
|
---
|
|
|
|
|
Bucket Clearance Circle w/Brakes, in. (mm)
|
---
|
|
|
|
|
Operating Weight w/Loader and Box Blade, lb. (kg)
|
7280 (3302)
|
|
|
|
|
Operating Weight w/Backhoe, lb. (kg)
|
---
|
|
|
|
|
Transport Height-Backhoe Folded, in. (mm)
|
---
|
|
|
|
|
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
|
Specs, Quotes, Overview
Print a Brochure